LIQUI MOLY MERDEKA COMBO!!! MOS2 SEMI 10W40 (6948)-4 LITER + ENGINE FLUSH 8374

  • Sale
  • Regular price RM208.00 MYR
Shipping calculated at checkout.


PROMOSI MERDEKA DARI LIQUI MOLY KINI KEMBALI!!!!

DAPATKAN SEKARANG SELAGI STOCK MASIH ADA!!!

PROMOSI SAH SEHINGGA 30 SEPTEMBER 2020


MOS2 LEICHTLAUF 10W40

Description
Specially developed for year-round use. Selected
mineral and synthetic base oils as well as the high additive content, including the solid lubricant molybdenum disulfide (MoS₂), guarantee optimum lubrication under extreme operating conditions and long oil
change intervals.
Properties
- excellent wear protection
- no harmful effects on catalytic converters
- good cold-start behavior
- stable to ageing and stable viscosity
- outstanding engine cleanliness
- outstanding emergency-running properties
suitable for gasoline and diesel engines with and
without exhaust-gas turbocharging- instant lubrication after cold start

Technical data
Sulfate ash 1,0 - 1,6 g/100g
DIN 51575
Color / appearance grau-schwarz
Areas of application
For gasoline and diesel engines. Especially suitable
for vehicles without soot particle filter. Tested for turbochargers and catalytic converters.
Application
Note the vehicle and engine manufacturers' operating instructions.

 

ENGINE FLUSH
Description
Engine Flush Plus is a specially formulated combination of additives and carrier fluid. In combination with
the carrier fluid, the highly effective detergent and
dispersant additives dissolve sludge and lacquer
formers. All types of oil-soluble and oilinsoluble
residues are brought into suspension and removed
during the next oil change. An engine which has been
cleaned of deposits and contamination and which is
then filled with fresh oil not contaminated with old
impurities can develop its full performance characteristics.


Properties
- optimal engine performance
- highly economical
- tested for turbochargers and catalytic converters
- does not attack common sealing materials
- gentle cleaning
- rapid cleaning
- suitable for diesel particulate filters
- simple to use without disassembly
- minimizes wear

Application
One 300 ml can is sufficient for up to 6 liters of oil.
Add Engine Flush Plus to the motor oil at running
temperature before changing the oil. After adding the
product, allow the engine to idle for approx. 10
minutes. Then change the oil and the filter.
Engine Flush Plus is compatible with all commercially available motor oils.