Liqui Moly Motorbike Care, 1602/1591/7820/7820 (SUPER BUNDLE DEAL)

  • Sale
  • Regular price RM133.38 MYR
Shipping calculated at checkout.

Motorbike Speed Shooter 80ml


State-of-the-art, ash-free combination of agents with acceleration-enhancing, cleaning, dispersing and material-protecting properties. The product has been formulated using state-of-the-art additive and fuel technologies in accordance with the requirements of today's engines, fuels and running conditions. Ensures increased driving enjoyment due to optimized performance. The engine starts easier and also runs smoother.



- good corrosion protection

- residue-free combustion

- guarantees optimum combustion

- improves the acceleration

- removes deposits from entire fuel system

- highly economical

- prevents carburetor icing

- higher performance gain


Areas of application

For 2-stroke and 4-stroke gasoline engines (aspirated and injection).



Add to the fuel tank. For the optimum effect, add every time you refuel. Fully compatible with all gasoline grades. 80 ml is sufficient for up to 10 liters of fuel.



Motorbike Chain Lube White


White, full synthetic special grease. For optimal lubrication through visible application on the chain. Cold, heat and spray resistant. Very good adhesion and wear protection. Reduces chain elongation and extends the service life of the chain. Good creeping properties and good corrosion protection. The 50 ml can can be refilled with the 400 ml can. We recommend cleaning the chain with Motorbike Chain Cleaner (Part No. 1602) before use. 


Technical data

Base: synthetic oil, additives

Color / appearance: white 

Density: 0,69 g/ml 

Operating temperature range: -30 °C to +180 °C short term 200 °C °C 

Water resistance at 90 °C: 0 DIN 51 807 

Form: aerosol, liquid

Flash point: -60 °C


Areas of application

For all highly-stressed and high-speed motorcycle chains with and without O/X-rings. 



We recommend cleaning the chain with Motorbike Chain Cleaner (Part No. 1602) before use. Spray chain with Motorbike Chain Spray until white. The lubricant attains its final consistency and adherence once the solvent has evaporated.


Motorbike Chain and Brake Cleaner


Specially developed cleaner with selected solvent combinations for fast, easy cleaning and degreasing structural parts in the two-wheel sector.



- high proportion of active components

- absolutely free of chlorine

- optimum penetration capacity

- low surface tension

- dissolves resin and tar-type residues

- controlled evaporation free of residues

- leaves no residues

- optimizes economical use

- removes oil and grease-based contaminants


Areas of application

For cleaning chains with and without O/X-rings on two-wheeled vehic les and quads.



Place a box or rag under the parts to be cleaned. Spray dirty chains withMotorbike Chain Cleaner and let it run off. After the solvents have evaporated, the chain will be clean and free of grease and ready to be coated with Motorbike Chain Lube or Chain Spray White. Do not spray onto plastics. Do not lay rubber components in a container with Cleaning Fluid to clean them as they may be attacked. Note Check parts which have been painted for compatibility by testing on a hidden area.