Motorbike Visor Cleaner
Description
Maintains and cleans helmets and visors. Active antimisting for glass and plastic visors. With long-term effect. Removes dirt, insects, oil and silicon films. Provides clear vision and safety.
Technical data
Form: aerosol, liquid
Color / appearance: colourless
Base: alcohols, agents
Solubility: soluble in water
Flash point: -60 °C DIN ISO 2592
Density: 0,68 g/ml
Odor: Lemon
Areas of application
Especially to clean, maintain and antimist glass and plastic visors.
Application
Test visor to be cleaned for compatibility. Dirt and insects Spray fluid onto surface, allow it to take effect and remove with a damp cloth or sponge. Anti-misting Spray onto surface and allow to dry.
Motorbike Chain Cleaner
Description
Specially developed cleaner with selected solvent combinations for fast, easy cleaning and degreasing structural parts in the two-wheel sector.
Technical data
Color / appearance: colourless
Flash point: < 21 °C
Density: 0,707 g/ml DIN 51757
Base: solvent-mixture, acetone-free
Form: liquid, aerosol
Propellant: CO2
Areas of application
For cleaning chains with and without O/X-rings on two-wheeled vehicles and quads.
Application
Place a box or rag under the parts to be cleaned. Spray dirty chains withMotorbike Chain Cleaner and let it run off. After the solvents have evaporated, the chain will be clean and free of grease and ready to be coated with Motorbike Chain Lube or Chain Spray White. Do not spray onto plastics. Do not lay rubber components in a container with Cleaning Fluid to clean them as they may be attacked. Note Check parts which have been painted for compatibility by testing on a hidden area.
Motorbike Helmet Interior Cleaner
Description
Cleans gently and thoroughly. Removes bacteria and provides a pleasant, fresh scent. The protective film prevents dirt from accumulating quickly.
Technical data
Density at 20 °C: 0,91 g/ml
Base: water-alcohol surfactant solution, aromatic principles
Color / appearance: colourless
Odor: Zitrone
pH value: neutral
Form: aerosol, liquid
Propellant: propane, butane
Flash point: -60 °C
Areas of application
Gentle and thorough cleaning of helmets, helmet upholstery, visors, trims, saddles, etc.
Application
Shake vigorously before use. Next, spray onto a soft cloth or rag and rub into the fabric uniformly using slight pressure. Test plastic components on a suitable spot beforehand to make sure that the colors are not affected. Do not use the helmet immediately after cleaning as the product is based on a water/alcohol solution.
Note: After using the Motorbike Helmet Interior Cleaner, ventilate the helmet thoroughly.
Motorbike Cleaner
Description
Motorbike Cleaner is a cleaning fluid which has been specially developed for motorbikes and bicycles and is free of solvents which are harmful to the environment and phosphates.
Technical data
Density at 20 °C: approx. 1.075 g/cm³ (agent) g/cm³
Base: surfactants; watersoluble solvent
Biodegradable: more than 80 % according to WMG
Color / appearance: beige
Odor: parfumed
pH value: 8,2 (20°C)
Areas of application
For cleaning motorbikes, bicycles and scooters etc.
Application
Spray thinly and evenly on motorbike, bicycle or scooter only when cool. Use a brush on places which are heavily contaminated. Leave Motorbike Cleaner to act for 5-15 minutes depending on contamination and rinse thoroughly with a jet of water. When dry, wipe with a soft cloth. For parts which have been repainted, check paint for compatibility (spotting or lifting) on somewhere out of sight. If used properly however, paint and plastic will not be damaged. When cleaning, the local regulations of the water management authority must be followed.
Note: Do not use on motorbikes with magnesium rims.
Motorbike Chain Lube Spray White
Description
White, full synthetic special grease. For optimal lubrication through visible application on the chain. Cold, heat and spray resistant. Very good adhesion and wear protection. Reduces chain elongation and extends the service life of the chain. Good creeping properties and good corrosion protection. The 50 ml can can be refilled with the 400 ml can. We recommend cleaning the chain with Motorbike Chain Cleaner (Part No. 1602) before use.
Technical data
Base: synthetic oil, additives
Color / appearance: white
Density: 0,69 g/ml
Operating temperature range: -30 °C to +180 °C short term 200 °C °C
Water resistance at 90 °C: 0 DIN 51 807
Form: aerosol, liquid
Flash point: -60 °C
Areas of application
For all highly-stressed and high-speed motorcycle chains with and without O/X-rings.
Application
We recommend cleaning the chain with Motorbike Chain Cleaner (Part No. 1602) before use. Spray chain with Motorbike Chain Spray until white. The lubricant attains its final consistency and adherence once the solvent has evaporated.