Motorbike Chain Lube
Description
Fully synthetic chain grease. Extremely adhesive and water resistant. Excellent creeping and lubrication behavior. Especially suitable for high-speed chains. Reduces chain elongation and provides long chain service life. Biodegradability (Test CEC L-33T-82 in 21 days > 80 %). Optimal effectiveness only with unmixed use. We recommend cleaning the chain with Motorbike Chain Cleaner (part no. 1602) before use.
Properties
- reduces chain elongation
- friction and wear reducing
- resistant to acceleration forces
- excellent adhesion
- especially cold, hot and splash-water resistant
- highest load-carrying capacity
- excellent penetration action
- outstanding corrosion protection
Areas of application
Initial and maintenance lubrication of power train chains. Especially suitable in dusty, dirty and corrosive atmospheres. For highly-stressed and high-speed chains with and without O-rings.
Application
Carefully clean chain with solvent such as Motorbike Chain Cleaner (part no. 1602). Apply by spraying. The lubricant attains its final consistency and adherence once the solvent has rapidly evaporated.
Motorbike Chain and Brake Cleaner
Youtube Application Video:https://www.youtube.com/watch?v=Jb3CtpkVPTU
Description
Specially developed cleaner with selected solvent combinations for fast, easy cleaning and degreasing structural parts in the two-wheel sector.
Properties
- high proportion of active components
- absolutely free of chlorine
- optimum penetration capacity
- low surface tension
- dissolves resin and tar-type residues
- controlled evaporation free of residues
- leaves no residues
- optimizes economical use
- removes oil and grease-based contaminants
Areas of application
For cleaning chains with and without O/X-rings on two-wheeled vehic les and quads.
Application
Place a box or rag under the parts to be cleaned. Spray dirty chains withMotorbike Chain Cleaner and let it run off. After the solvents have evaporated, the chain will be clean and free of grease and ready to be coated with Motorbike Chain Lube or Chain Spray White. Do not spray onto plastics. Do not lay rubber components in a container with Cleaning Fluid to clean them as they may be attacked. Note Check parts which have been painted for compatibility by testing on a hidden area.
Motorbike Cleaner
Description
Motorbike Cleaner is a cleaning fluid which has been specially developed for motorbikes and bicycles and is free of solvents which are harmful to the environment and phosphates.
Technical data
Density at 20 °C: approx. 1.075 g/cm³ (agent) g/cm³
Base: surfactants; watersoluble solvent
Biodegradable: more than 80 % according to WMG
Color / appearance: beige
Odor: parfumed
pH value: 8,2 (20°C)
Areas of application
For cleaning motorbikes, bicycles and scooters etc.
Application
Spray thinly and evenly on motorbike, bicycle or scooter only when cool. Use a brush on places which are heavily contaminated. Leave Motorbike Cleaner to act for 5-15 minutes depending on contamination and rinse thoroughly with a jet of water. When dry, wipe with a soft cloth. For parts which have been repainted, check paint for compatibility (spotting or lifting) on somewhere out of sight. If used properly however, paint and plastic will not be damaged. When cleaning, the local regulations of the water management authority must be followed.
Note: Do not use on motorbikes with magnesium rims.