Motorbike Chain and Brake Cleaner
Description
Specially developed cleaner with selected solvent combinations for fast, easy cleaning and degreasing structural parts in the two-wheel sector.
Technical data
Color / appearance: colourless
Flash point: < 21 °C
Density: 0,707 g/ml DIN 51757
Base: solvent-mixture, acetone-free
Form: liquid, aerosol
Propellant: CO2
Areas of application
For cleaning chains with and without O/X-rings on two-wheeled vehicles and quads.
Application
Place a box or rag under the parts to be cleaned. Spray dirty chains withMotorbike Chain Cleaner and let it run off. After the solvents have evaporated, the chain will be clean and free of grease and ready to be coated with Motorbike Chain Lube or Chain Spray White. Do not spray onto plastics. Do not lay rubber components in a container with Cleaning Fluid to clean them as they may be attacked. Note Check parts which have been painted for compatibility by testing on a hidden area.
Motorbike Visor Cleaner
Description
Maintains and cleans helmets and visors. Active antimisting for glass and plastic visors. With long-term effect. Removes dirt, insects, oil and silicon films. Provides clear vision and safety.
Technical data
Form: aerosol, liquid
Color / appearance: colourless
Base: alcohols, agents
Solubility: soluble in water
Flash point: -60 °C DIN ISO 2592
Density: 0,68 g/ml
Odor: Lemon
Areas of application
Especially to clean, maintain and antimist glass and plastic visors.
Application
Test visor to be cleaned for compatibility. Dirt and insects Spray fluid onto surface, allow it to take effect and remove with a damp cloth or sponge. Anti-misting Spray onto surface and allow to dry.
Motorbike Chain Spray White
Description
White, full synthetic special grease. For optimal lubrication through visible application on the chain. Cold, heat and spray resistant. Very good adhesion and wear protection. Reduces chain elongation and extends the service life of the chain. Good creeping properties and good corrosion protection. The 50 ml can can be refilled with the 400 ml can. We recommend cleaning the chain with Motorbike Chain Cleaner (Part No. 1602) before use.
Technical data
Base: synthetic oil, additives
Color / appearance: white
Density: 0,69 g/ml
Operating temperature range: -30 °C to +180 °C short term 200 °C °C
Water resistance at 90 °C: 0 DIN 51 807
Form: aerosol, liquid
Flash point: -60 °C
Areas of application
For all highly-stressed and high-speed motorcycle chains with and without O/X-rings.
Application
We recommend cleaning the chain with Motorbike Chain Cleaner (Part No. 1602) before use. Spray chain with Motorbike Chain Spray until white. The lubricant attains its final consistency and adherence once the solvent has evaporated.
Motorbike 2T Bike-Additive
Description
For all 2-cycle engines with mixed or separate lubrication. One filling with the dispenser (25 ml) is sufficient for 5 l fuel or fuel mixture.
Increases engine performance. Removes deposits in the fuel system and on intake and exhaust ports and prevents new formation. Protects the entire fuel system from corrosion. Cat tested. Clean engines need less fuel and reduce emissions.
For more information please refer to the link below.
https://products.liqui-moly.com/motorbike-2t-bike-additive-3.html
Motorbike Speed Shooter
Description
State-of-the-art, ash-free combination of agents with acceleration-enhancing, cleaning, dispersing and material-protecting properties. The product has been formulated using state-of-the-art additive and fuel technologies in accordance with the requirements of today's engines, fuels and running conditions. Ensures increased driving enjoyment due to optimized performance. The engine starts easier and also runs smoother.
Properties
- good corrosion protection
- residue-free combustion
- guarantees optimum combustion
- improves the acceleration
- removes deposits from entire fuel system
- highly economical
- prevents carburetor icing
- higher performance gain
Areas of application
For 2-stroke and 4-stroke gasoline engines (aspirated and injection).
Application
Add to the fuel tank. For the optimum effect, add every time you refuel. Fully compatible with all gasoline grades. 80 ml is sufficient for up to 10 liters of fuel.
For more information please refer to the link below.
https://pim.liqui-moly.de/pidoc/P003572/3823-MotorbikeSpeedShooter-21.0-en.pdf