Bike Brake and Chain Cleaner
Description
Cleaner with specially selected combination of solvents. For the rapid and effective cleaning and degreasing chains and disk brakes on bicycles. Particularly effective on oily and greasy dirt.
Properties
- removes oil and grease-based contaminants
- leaves no residues
- high proportion of active components
- optimum penetration capacity
Areas of application
For cleaning and degreasing chains and disk brakes on bicycles. Also suitable for e-bikes.
Application
Spray generously over drive chain and catch excess fluid. Leave to dry for 10 minutes. Then treat with chain oil or chain spray. Spray generously over disk brake system and catch excess fluid. Leave to dry for 10 minutes.
Bike Chain Spray
Description
Universal long term lubricant for bike chains for moist and dirty as well as dry and dusty conditions. Displaces moisture, water repelling effect, ensures particularly smooth operation. Excellent penetration and adhesion. Protects all metal parts against corrosion. Neutral in contact with plastics, paint and metals. Vegetable base ensures biodegradability.
Properties
- very water-repellent
- does not attack plastics, paints and metals
- prevents squeaks
- high wear resistance
- biologically degradable
- good adhesion
- good corrosion protection
Areas of application
Especially for lubrication and care of bike chains under wet or dry conditions.
Application
Clean bicycle chain with Brake and Chain Cleaner (part no. 6054) before use. Then shake the chain spray well and apply thinly to the dry chain. Wipe off any excess.
Liqui Moly Bike Cleaner
Description
Highly effective, biodegradable bike cleaner. Especially designed for extremely dirty bikes. Quickly dissolves and removes mud, dirt, dust, leaves, etc. Leaves no greasy residues and has no influence on braking effect.
Technical data
Base: surfactants, water soluble solvent
Color / appearance: colorless
Density at 20 °C: 1,014 g/cm³
Areas of application
For complete cleaning of bikes and carbon parts.
Application
Rise off coarse contaminants with a jet of water. Spray Bike Cleaner onto wettened surface from approximately 30 cm away. Leave for 2 to 3 minutes to take effect. Don't leave the cleaner on the bike for much longer than the recommended time. Rinse off bicycle with clear water and dry.
Our information is based on thorough research and may be considered reliable, although not legally binding.
Note: Do not use under direct heat or on hot paint surfaces!